about Manufacturing Division

SREC products are manufactured to satisfy specific requirements to achieve utility. Our team of trained engineers and product designers are involved during the design and execution stage with the concerned client to provide equipment tailored to their requirements taking into account the specific safety and environmental considerations, in addition to the International Standards. A brief of our main categories of manufactured products is detailed below.

Pre Fabricated Package Substation (250 kVA-5MVA)

Package Unit Substations are locally integrated at our works in Mussaffah, Abu Dhabi. These can be offered in both Metallic (Alu Zinc or Hot Dipped Galvanized steel electro statically powder coated) and GRP Enclosures. These units are built to be easily transported as a single unit. Each unit consists of the following equipments:

  • MV Switchgear (11KV/22KV) (Utility approved)
  • Transformer (IMEFY, Spain / ADWEA approved Transformer)
  • LV Flanged Feeder Pillar ( SREC, U.A.E)

Hundreds of Package units are currently operating ni UA. E. (ADWEA), (ADDC & AADC), Oman (MJEC, MEDC, DPC) &various other utility networks. Type Tested in independent international laboratories and Prequalified for Utilities, these units conform to the latest products specification like IEC 61330 / IEC 62271

Distribution Boards (DB)

Split type DBs with IP31 and ratings up to 100A are offered with incoming rating up to 100A, with incomer as Isolator/ELCB/MCCB and outgoing as MCB or RCB suitable for required fault level and type tested as per ASTA-UK

Main Distribution Board (MDB) Sub Main Distribution Board (SMDB)

MDBs suitable for all power distribution applications up to 2500A/415V/50Hz is designed and type tested for 50kA 1 sec as per IEC 61439.
With In-house facility for Engineering/Certified Testing, SREC offers tailor made solutions in line with system or project requirement.
MDBs are offered ni Form 4 type 6 or type 7 with
front as well as rear access with different IP classes. SMDBs are of Form 2 with incomer ratings as per project requirement.

LV Flanged Feeder Pillar


These form the LV part of prefabricated / pocket substation. Hundreds of such units are currently operating ni UA.E. (ADWEA), (ADDC &AADC) & various other utility networks. Type Tested ni independent international laboratories and Prequali-
fied for Utilities of
UAE and GCC, these units conform to the latest products specification like IEC 61439. Available ni various rating from 800A to 4000A.

LV DISTRIBUTION PANELS (UP TO 4000A)

LV panels rated upto 4000A are assembled locally at our works ni Mussaffah. Built ni Metallic Hot dipped galvanized sheet steel powder coated to desired RAL colour requirements, they can be offered ni 9 way or 18 way configurations.

These units are currently operating in ADWEA network. Type Tested in Spain and manufactured under license and technical collabration from Pronutec, Spain, these units conform to the latest specifica- tions/ IEC 61439 SREC LV panels are available in Form 3 and or Form 4-B also.

LV SUB DISTRIBUTION FEEDER (800A) AND SERVICE CABINETS(400 A)

LV Sub Distribution Panel, manufactured locally at our facility in Mussaffah, can be offered in both Metallic (Aluminum or Hot Dipped Galvanized steel electro statically powder coated) and GRP Enclosures.
More than 40,000 feeder pillars and service cabinets are operating ni ADWEA, (ADDC &AADC), DMW & ABU DHABI Municipality. Type tested in various independent International laboratories like CESI, IPH and Prequalified for utilities, these units conform to the latest specification and IEC 61439

AUTOMATIC POWER FACTOR CONTROL PANELS (APFC)

APFC are designed and manufactured with latest ADDC specification up to 400kVAR 415V/50Hz suitable to switch ON/OFF capacitors automatically to improve power factor as per the requirement of the connected load

STREET LIGHTING CONTROL CABINETS AND LIGHT POLE CUT OUTS

LV Sub Distribution Panel, manufactured locally at our facility in Mussaffah, can be offered ni both Metallic (Aluminum or Hot Dipped Galvanized steel electro statically powder coated) and GRP Enclosures.
More than 22,000 pole cut outs and street lighting cabinets are currently operating in ADWEA, ADDC, AADC, Abu Dhabi Municipality, DM, DMW and RTA. These are assembled locally at our works in Mussaffah. Street Lighting control cabinets has been Type Tested in Spain and pre-qualified for utilities, These units conform to the latest specification.